You're welcome. And no research necessary as I have/had all of these parts.I have 2 of the sc ea250s. One is holding the v clamp with the snare basket on the left. I think the sc ea200 is what I need. Thanks for the research
If you wanted to do it on the cheap (free) and aren't using the other SC-EA250, you could use just the half that has the 1" tube. If that's the side with the length adjustment clamp on it, look to see how the clamp is held onto the tube. The SC-EA200 just uses a tiny hex key (allen) set screw, but I'm not sure what the 250 uses as I no longer own one. All I know is that all hardware comes apart whether it's by "spring pins" (a hollow pin with a slit down it's length that is driven into a hole slightly smaller than it's diameter and held in by tension), allen set screws, or simply press fit over the end of a splined tube.
Or if worse comes to worse, you could just cut off that end of the tube.