Mounting the module on a A-E conversion

[ric drumm]

I have an unfounded concern mounting my TD-17 to a Hi Hat or cymbal stand. I had it on the HH stand for a bit and got concerned about it bouncing so much. However, I see that several mid level kits come with a mount to the HH stand. I'm a minimalist and prefer not to have a separate stand for the module if it's not necessary. Please share your thoughts.

 

[doggyd69b]

Try using this:

https://www.amazon.com/Gibraltar-9713PM-Double-Braced-Adjustable-Platform/dp/B01E7FFON6/ref=sr_1_1_sspa?crid=3VZJSH7QLWPWJ&dib=eyJ2IjoiMSJ9.mS36uZJ9hQNEJxmzQZeerb6AFU8I2hZ8j8bWabX41Sk-nVuolVfmTyL5iP_uq7iQoyflSzDM8gfo4RPG21oFxq86O0ujY8nkXpb1OaN929rpLPUloHzZQHPHZqnj32LcH-onhVbo1yUFnZDSPkaFHZTE7AaJJyQa9ahVw2BRUeBQq3MuMZxhHcyRxUuNluos4PBEbMqUPNme9JTGokYIr-dgjw1M390FOq2lcmPnQPo3ao1OPee90bs8S9pCXh-Nnra2735GRYEzzDETlMNjBWvgCYLF8cW-9wZH3us3NPE.eVUbx4qcLBv-LQuggu8DT6czPdYnD7WumDfrFuDULfo&dib_tag=se&keywords=drum+module+mount&qid=1720455858&sprefix=drum+module+mount%2Caps%2C411&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1&smid=A2OH8CUXAUQ6XZ

And this:

Amazon.com

I realize you don't want another stand, then... is it possible to use a cymbal stand instead of the HH stand? Not sure if you have one that is close enough, maybe relocate the module to the other side (the ride side) and use that stand to mount it, since you mostly don't "crash" the ride, the vibration and shaking will be much less and it should not affect the module at all.

 

[LarryJ]

I use a Gibraltar SC-PUGC multi-clamp to mount my TD-17 to the hihat. 1-1/2 years on my well used home practice kit and no problems.

 

[green glass drum]

I use a Gibraltar SC-PUGC multi-clamp to mount my TD-17 to the hihat. 1-1/2 years on my well used home practice kit and no problems.

View attachment 148348

That is a good looking mount...sir.

 

[electrodrummer]

I have an unfounded concern mounting my TD-17 to a Hi Hat or cymbal stand. I had it on the HH stand for a bit and got concerned about it bouncing so much. However, I see that several mid level kits come with a mount to the HH stand. I'm a minimalist and prefer not to have a separate stand for the module if it's not necessary. Please share your thoughts.

Roland sells it bolted to a hat stand, so one presumes it can handle the vibes.

Roland - VAD307 | V-Drums Acoustic Design

VAD307: V-Drums Acoustic Design - V-Drums Acoustic Design Performance in a Club-Sized Kit

www.roland.com

 

[ric drumm]

Thanks for the replies. I have the SP version of that clamp, and will likely connect to either the hi hat or cymbal stand.