Looking for double tom stand with 10.5 mm tom posts and boom cymbal arm

Thunder 42

Silver Member
I am looking for something like this, except this one has 12.7 mm posts for the toms :

https://www.amazon.com/gp/product/B0002F4XXS/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

This would be for vintage Premier drums (Signia), which, I believe, fit the 10.5 mm tom posts. Any help, friends ?
check out GC of Fredericksburg, VA. They have a used DW 9000 double tom / boom cymbal stand for a fairly decent price, however, I do not recall what they're asking.
 

Destroyer772

Gold Member
I am looking for something like this, except this one has 12.7 mm posts for the toms :

https://www.amazon.com/gp/product/B0002F4XXS/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

This would be for vintage Premier drums (Signia), which, I believe, fit the 10.5 mm tom posts. Any help, friends ?
You may have to buy one of these and switch out the L arms with 10.5 mm like these.http://www.gibraltarhardware.com/?fa=partsdetail&curcat=2&bnd=11&cid=104&sid=461&pid=1570
 
M

Matt Bo Eder

Guest
Agreed with Destroyer. Just get that DW stand you've found and replace the arms. Gibraltar makes 12.7mm, 10.5mm, and 9.5mm sized ball arms, all you have to do is swap them out. The ball size is consistent from brand to brand.
 

alparrott

Platinum Member
Tama, PDP, and older Ludwig stands use 10.5mm arms too. But if you are dead set on having the boom arm, I agree with Bo and the others - replace the 12.7mm ball joints on here with the 10.5mm Gibraltar ball joints.
 
Top