simmsdn
Silver Member
I'm certain there are other folks out there using the Kelly Shu, but wanted to get a thread started. I searched and did not see a pre-exisiting one.
I bought the composite model. Didn't see much sense in dropping twice the dinero for the steel one. I am not a touring drummer.
I installed it in about 30 minutes (some good YouTube videos demonstrating installation, plus the included instructions are fine).
I have it mounted in a late-70s, 6-ply Maple, Ludwig Classic. Using a Sennheiser e602 microphone.
I've recorded a sample through a TASCAM US-1641 into Cakewalk Sonar Producer 8.3. First is raw, then compression, then eq, then compression and eq, and finally I retuned the drum recorded and added some compression and eq.
I bought the composite model. Didn't see much sense in dropping twice the dinero for the steel one. I am not a touring drummer.
I installed it in about 30 minutes (some good YouTube videos demonstrating installation, plus the included instructions are fine).
I have it mounted in a late-70s, 6-ply Maple, Ludwig Classic. Using a Sennheiser e602 microphone.
I've recorded a sample through a TASCAM US-1641 into Cakewalk Sonar Producer 8.3. First is raw, then compression, then eq, then compression and eq, and finally I retuned the drum recorded and added some compression and eq.