Does this sound like it could work? (Offset tom mounting)

organworthyplayer337

Well-known member
A Gibraltar 9713PM + a Tama MTH1000
1589911071222.png
1589910917672.png




Here's what I am thinking:

Attaching the Tama double tom stand to the "centered" clamp in the front (the one that is holding the tom in this photo):
1589911440938.png and mounting two toms (10" and 12") on the Tama MTH1000.

I would probably mount a cymbal on one of the clamps in the back and try to swivel it to be more centered. Any oversights here?
 

Attachments

drumnut87

Well-known member
i seconds the extra memory lock, but it works fine :) i have the same gibraltar stand and its sturdy as anything! :) just make sure the double tom part is over one of the legs when deployed otherwise the whole thing will topple over.

also, as a side note, make sure the tom mount will fit in the gibraltar stand holes, as theres a slight chance it could be too big for the mount holes.
 
Last edited:

organworthyplayer337

Well-known member
i seconds the extra memory lock, but it works fine :) i have the same gibraltar stand and its sturdy as anything! :) just make sure the double tom part is over one of the legs when deployed otherwise the whole thing will topple over.

also, as a side note, make sure the tom mount will fit in the gibraltar stand holes, as theres a slight chance it could be too big for the mount holes.
Tama lists it's tubing as 25.4mm (1"), and Gibraltar says the stand accepts 1/2"-1" tubes so I'm assuming it'll fit. There's another website that says it accepts tubes from 3/4"- 1 1/4", which would be even better
 
Top