DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Heads and Sticks

Heads and Sticks Discuss Heads and Sticks

Reply
 
Thread Tools
  #1  
Old 10-31-2011, 10:33 PM
IronBlimp IronBlimp is offline
Junior Member
 
Join Date: Oct 2011
Location: South Africa
Posts: 8
Default METAL- how do i get that sound

I want my toms to sound like bellowing hell dogs-but how?
Reply With Quote
  #2  
Old 11-01-2011, 04:20 PM
gseifers gseifers is offline
Junior Member
 
Join Date: Jul 2011
Location: Indiana
Posts: 22
Default Re: METAL- how do i get that sound

I would start with getting drum heads that really resonate. Remo pinstripe's are a pretty good starting point for a harder hitter, and they sound very nice. Evans G2 clear also would work well. But the tuning is the most important part. To get the fullest sound out of each drum, you have to take the time to find the drum's natural pitch. That is the lowest point that the drum fully resonates. This will give you a full sound.
Reply With Quote
  #3  
Old 11-01-2011, 04:50 PM
Mad About Drums's Avatar
Mad About Drums Mad About Drums is offline
Pollyanna's Agent
 
Join Date: Oct 2011
Location: Shropshire, UK
Posts: 5,495
Default Re: METAL- how do i get that sound

Quote:
Originally Posted by gseifers View Post
I would start with getting drum heads that really resonate. Remo Pinstripe...
Sorry... the pinstripe's do not resonate that much, they're double films heads with about 1" of the films glued together at the edge of the head to cut overtones.

However, you right about the Evans G2, Remo's Emperor is another favourite heavy duty heads that will give an open sound.
__________________
Keep On Drumming
Reply With Quote
  #4  
Old 11-06-2011, 08:25 AM
Goreliscious's Avatar
Goreliscious Goreliscious is offline
Senior Member
 
Join Date: Oct 2008
Posts: 256
Default Re: METAL- how do i get that sound

You'll have to be a bit more specific, name a song that has a tom sound you like.

A clear 2 ply skin on top with a single ply clear skin on bottom would be a good place to start. "Bellowing" suggests you like a big sound, you'll hear more body of the drum with clear skins than with coated.

If you want a punchy sound, tune the bottom head slightly tighter than the top to get the pitch bend down. If you want a boomier open sound, tune them to the same pitch.

Chances are it's the reverb that's been added in the mixing that's making the "bellowing" sound you like. I used to use Aquarian Performance 2 clears on top with Remo Ambassadors on bottom with both heads tuned low to get the old evil Obituary tom thud, but it's the reverb on the records that gives the drums life.

And this of course depends on what drums you've got, if you've got a modern kit with shallow toms then this is gunna be much harder for you. If you've got an older kit with Rock size toms, or even better; "square" toms, you'll find it really easy. You'll have to adjust your skin selection around what drums you have...you can make a deep tom sound like a shallow tom, but you can't make a shallow tom sound like a deep tom.
__________________
www.facebook.com/openwristexile
Reply With Quote
  #5  
Old 11-06-2011, 08:43 AM
kettles's Avatar
kettles kettles is offline
Gold Member
 
Join Date: Sep 2009
Location: Rotorua, New Zealand
Posts: 1,201
Default Re: METAL- how do i get that sound

Try single ply heads on your toms, they sound great for anything heavy. Clear Ambassador or G1 with a center dot will be the one to go for.
__________________
Hi, I'm Andrew.
My old band, come download our stuff
Reply With Quote
  #6  
Old 11-06-2011, 04:01 PM
alparrott's Avatar
alparrott alparrott is offline
Platinum Member
 
Join Date: Jul 2009
Location: Wenatchee, WA
Posts: 4,182
Default Re: METAL- how do i get that sound

Here's the biggest tip I can give you. Tune the toms correctly. Watch the Gatzen video, apply liberally. I typically tune my toms a scoche higher than is intuitive - it gets them to project more with a rounder, fuller tone and more sustain. What head you use is, in my opinion, secondary to how you tune the head.

Then minimize muffling. Go without if you can stand it. Otherwise use something minimally invasive, like part of a overlay ring or a spot of moongel. Get out in front of your kit and listen to it. It sounds much different out front, where the sound is meant to project.
__________________
Al Parrott
"Jus suum cuique"
-------------------------------------------------------
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 06:41 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com