DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Other Gear

Other Gear Discuss Hardware and all other equipment not covered in the other topics

Reply
 
Thread Tools
  #1  
Old 05-24-2009, 05:50 PM
JoseV JoseV is offline
Junior Member
 
Join Date: May 2009
Posts: 4
Default DW 5000's Spring Tension

I just got a set of DW 5000 double bass pedals.. i was use to my pedals to have a pretty high tension but the dw's seem to have no tension a all.. can some1 please tell me how to adjust the spring tension or any other adjutments i can make?
Reply With Quote
  #2  
Old 05-24-2009, 07:24 PM
rmandelbaum's Avatar
rmandelbaum rmandelbaum is offline
Platinum Member
 
Join Date: Jun 2007
Location: Austin, TX USA
Posts: 2,042
Default Re: DW 5000's Spring Tension

You have to loosen the lock nut on the top side of the threaded rod that connects to the spring. Then you pull down on the hex nut on the bottom. This will allow you to turn it and tighten up the spring.

__________________
DW Collectors
Vintage Superstars
Roland TD-20
Misc. Snares
My Web Site
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 06:28 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com