DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Other Gear

Other Gear Discuss Hardware and all other equipment not covered in the other topics

Reply
 
Thread Tools
  #1  
Old 05-12-2009, 02:56 AM
Haarp Haarp is offline
Junior Member
 
Join Date: Apr 2009
Posts: 2
Default First Drum Build Questions

Hi all.. i'm not sure this is the right section to post this but here goes..

I'm planning on building a kit:

Kick: 20 x 20
floor: 14 x 14
tom: 7 x 12

but i have a lot of questions i need answered.

for starters..How far away should a lug be from the bearing edge?

and, what size tension rods for said drum sizes?

sorry for the dumb questions..thanks for any help.
Reply With Quote
  #2  
Old 05-13-2009, 01:01 AM
Les Ismore's Avatar
Les Ismore Les Ismore is offline
Platinum Member
 
Join Date: Jul 2006
Location: Location, Location!
Posts: 3,924
Default Re: First Drum Build Questions

It all explains itself once you get the parts.

What parts to get? Talk to the supplier. Hopefully your buying from a knowledgeable dealer, they'll sell you exactly what you need to make it work.

It really doesn't matter how deep you mount the lug, after the minimum of course. As an example: Ludwig uses the same lug on its 5.5" Supraphonic as it does on the 6.5", its even mounted in the same position. Difference- one has longer tension rods.

What's the minimum? Once you get the parts, do a mock-up, it reveals itself.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com