![]() |
|
|||||||
| Other Gear Discuss Hardware and all other equipment not covered in the other topics |
![]() |
|
|
Thread Tools |
|
#1
|
||||
|
||||
|
|
|
#2
|
||||
|
||||
|
Quote:
Some of the drawbacks: It reduces the life of the drum head and make the drum louder which, in my experience, is a drawback to everyone else. |
|
#3
|
|||
|
|||
|
With my ELIMs it a 'splat' instead of a 'doof'
not nice. |
|
#4
|
||||
|
||||
|
Having a "reversible" beater is one of the quickest and easiest ways to change your sound. Going from plastic to felt, or wood to felt. An "inverted" beater is actually a beater designed for electronic kick triggers, because some kick pedals do not have enough adjustablity built into them. On the left is a "reversible" beater. On the right is an "inverted" beater, which also happens to be "reversible". DW was the first pedal maker (that I recall) to pretty much make the reversible beater a standard issue item. Cats who have beater bounce issues, and are using the plastic side of a plastic/felt combo sometimes can rid themselves of the bounce by simply going to the felt side.
__________________
This seat does not recline as per Federal Aviation Regulation 121.310 (f)(3) |
|
#5
|
||||
|
||||
|
as said before, the plastic on the ELIMs sounds like tapping the bass with a ladle.
|
|
#6
|
|||
|
|||
|
Quote:
I play felt side for the quieter stuff and then turn it around for the bigger rock stuff. I prefer the plastic side as it sounds huge through a PA....I love it. |
|
#7
|
||||
|
||||
|
My Pearl Eliminator has a 4 sided beater. Flat and rounded felt, and the same for the plastic sides. The plastic gives a more "click" (sharper) sound then the felt. You can definately tell a difference between them.
|
![]() |
| Thread Tools | |
|
|