DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Other Gear

Other Gear Discuss Hardware and all other equipment not covered in the other topics

Reply
 
Thread Tools
  #1  
Old 11-09-2013, 06:29 PM
GRUNTERSDAD's Avatar
GRUNTERSDAD GRUNTERSDAD is offline
Administrator
 
Join Date: Apr 2006
Location: Florida's West Coast
Posts: 15,629
Default Puresound Pro Custom Snare wires

Has anyone tried these? If not then I'm the guinea pig. I just bought a 20 strand brass and a 20 strand steel. I'll let you know. Our friend Bob Gatzen has a few Youtube vids on them.

http://www.musiciansfriend.com/drums...#productDetail
__________________
Thank you for sharing my day.
Gretsch Renown
Reply With Quote
  #2  
Old 11-15-2013, 08:32 PM
KarlCrafton's Avatar
KarlCrafton KarlCrafton is offline
Platinum Member
 
Join Date: Oct 2007
Location: Detroit, Michigan
Posts: 4,519
Default Re: Puresound Pro Custom Snare wires

I have a few sets of these Pro Customs on snares--6.5 Acro, & 2 Brass 6.5 BB's is what I can recall ATM.
Regular steel wire model.
They sound good, and they sit nice and flat on the head. That crimped angled end works real well.
They've performed well at all volume levels, and are sensitive (can respond with a fingernail tap).
I used the strap at first, and it worked easily, and fine with the clip deal, but I just like the sound of cord better.

I am trying out some Fat Cat (Classic 20 with pitch) steel wires right now on a couple drums. Pretty bright all around, so I may put them on the Acro to liven that one up a little. It does sound good with the Custom Pros though. The Fat Cat wires were a little too lively on the Supralite snare.

Let me know what you think of the Brass wires compared to Steel. If they have a tiny bit warmer tone, I might like them on the Supralite.
__________________
My band Artificial Agent here: http://drummerworld.com/forums/showthread.php?t=116637
Reply With Quote
  #3  
Old 11-15-2013, 08:36 PM
eclipseownzu's Avatar
eclipseownzu eclipseownzu is offline
Silver Member
 
Join Date: Jul 2008
Location: New London, CT
Posts: 939
Default Re: Puresound Pro Custom Snare wires

Just picked up a set of steel wires yesteday for a steel snare project I am working on. I am putting them on tonight, I will give an update once I get a chance to try them out.
__________________
www.reverbnation.com/stikpin
Reply With Quote
  #4  
Old 11-16-2013, 03:13 AM
GRUNTERSDAD's Avatar
GRUNTERSDAD GRUNTERSDAD is offline
Administrator
 
Join Date: Apr 2006
Location: Florida's West Coast
Posts: 15,629
Default Re: Puresound Pro Custom Snare wires

I put each one of these on different snares so I really can't compare the two metals but they are super sensitive and fit flat across the width of the snares. So far so good
__________________
Thank you for sharing my day.
Gretsch Renown
Reply With Quote
  #5  
Old 11-16-2013, 03:19 AM
bobdadruma's Avatar
bobdadruma bobdadruma is offline
Platinum Member
 
Join Date: Jul 2008
Location: second measure of a fill-in
Posts: 10,403
Default Re: Puresound Pro Custom Snare wires

I recently tried these German made unbranded snare wires that are sold by drumfactorydirect.com
http://www.drumfactorydirect.com/ind...=6_104_374_372
I installed a 20 strand set on my 1965 Slingerland Artist snare drum and they are as good as PureSound snare wires. They are about 1/2 the price!
They come with good quality snare cords for easy installation..
__________________
I kind of like old drums:)
Reply With Quote
  #6  
Old 11-16-2013, 10:27 AM
TColumbia37's Avatar
TColumbia37 TColumbia37 is offline
Silver Member
 
Join Date: May 2013
Location: Davenport, Iowa
Posts: 909
Default Re: Puresound Pro Custom Snare wires

I picked up a set of steel Custom Pros today, and played a gig with them. Huge difference tone. So sensitive and crisp. Had no issues at all
Reply With Quote
  #7  
Old 11-16-2013, 03:45 PM
eclipseownzu's Avatar
eclipseownzu eclipseownzu is offline
Silver Member
 
Join Date: Jul 2008
Location: New London, CT
Posts: 939
Default Re: Puresound Pro Custom Snare wires

I ended up putting the puresounds I picked up on my Black Panther so I could do an A/B comparison. The differences are really obvious, far more so than I imagined they would be. The biggest differences is how increasing or decreasing the snare tension really makes a difference in the sound of the drum. With the stock Mapex snares they were pretty much just on, off, or choking the drum. Now I have a whole new tuning option to worry about.

They also sound better through all of the different tension ranges. I will say that I am very impressed and will likely put the puresounds on all of my snares.
__________________
www.reverbnation.com/stikpin
Reply With Quote
  #8  
Old 11-16-2013, 04:14 PM
zarrdoss's Avatar
zarrdoss zarrdoss is offline
Gold Member
 
Join Date: Mar 2011
Location: Northern CO
Posts: 1,077
Default Re: Puresound Pro Custom Snare wires

Some of these came on my used OCDP 7 x 13 black brass snare. They sound good and I have had no problem with the pen, If I do I will just bypass it with grosgrain ribbon. They seem to make contact well and little sympathetic buzz.
Some of those German wires came stock on a few snares I got that Bob mentioned and I found no need to upgrade. In one case Puresound blasters and classics was a downgrade, too much buzz.
Reply With Quote
  #9  
Old 11-20-2013, 06:20 AM
Beam Me Up Scotty's Avatar
Beam Me Up Scotty Beam Me Up Scotty is offline
Silver Member
 
Join Date: Dec 2012
Location: Ontario, Canada
Posts: 684
Default Re: Puresound Pro Custom Snare wires

I've owned a set of these in the past. They were very sensitive and articulate. Perhaps a little bit too articulate for my tastes. I prefer a less defined ghostnote; a smooth (if you will) sound, and I found these wires just couldn't give me that, no matter how hard I tried.
__________________
"God is dead." - Nietzsche, 1882

"Nietzsche is dead." - God, 1900
Reply With Quote
  #10  
Old 11-20-2013, 03:41 PM
2bsticks's Avatar
2bsticks 2bsticks is online now
Gold Member
 
Join Date: Feb 2007
Location: Waltham Ma
Posts: 1,067
Default Re: Puresound Pro Custom Snare wires

I put a set of the 20 strand brass ones on my Magstar maple 5.5 X 14. Very pleased with the sound of the drum. I did however ditch the cotter pins. They were slipping for some reason on me? Using string and it's fine.
__________________
DW Performance, Magstar Drums, 1971 Slingerlands, Zildjian, Sabian, Paiste, Vic Firth, Remo
Reply With Quote
  #11  
Old 11-20-2013, 06:09 PM
Redbeard's Avatar
Redbeard Redbeard is offline
Senior Member
 
Join Date: Mar 2010
Location: Louisiana
Posts: 146
Default Re: Puresound Pro Custom Snare wires

I like the strap setup. It makes it easier to tune the reso head. I've had no problems with anything slipping out of place. One trick I've found with the pins is to not push them in all the way. Just center them in the strap and they'll sit evenly over the opening on the wires.
__________________
Gretsch Renown 24/13/16
various Zildjians
various snares
Reply With Quote
  #12  
Old 11-20-2013, 08:22 PM
TColumbia37's Avatar
TColumbia37 TColumbia37 is offline
Silver Member
 
Join Date: May 2013
Location: Davenport, Iowa
Posts: 909
Default Re: Puresound Pro Custom Snare wires

I keep hearing about people having troubles with the pins. I have never seen this issue. While this is the first set that I have personally owned, I've been exposed to them quite a bit, and I've never seen a problem. I'm sure you could replace the pins with something a little more robust if you wanted.
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com