_Mark
Member
I've been thinking about getting a new snare lately.
Out of you guys personal opinions, which would you choose? My sound preference is slightly above medium pitched to high pitch.
Here they are-
SJC Custom 6.5x14 Hyrbid. 25 ply maple (wrapped gold sparkle) and acrylic (clear) would be about a half inch thick. Diecast hoops, brass hardware. 4 1 inch drilled vents. (would be acrylic/maple/acrylic)
Here's a basic idea of the looks-
http://sjcdrums.com/uploads/gallery/large/cassamassima_snare.jpg
The other snare is about 7 ply maple 6.5x14. Diecast hoops. So it's the Lugwig Classic Maple Snare-
http://memphisdrumshop.com/index.php?main_page=product_info&cPath=2_31&products_id=9804
And last would be another SJC snare, 6.5x14 8 ply maple, brass hardware, diecast hoops. Then a hand burned design into the the natural finish.
http://sjcdrums.com/uploads/gallery/large/bravelittletoastersnare2.jpg (it has a cord that's burned all the way around the drum too that leads to the main design which is seen there.)
Thanks!
Mark
Out of you guys personal opinions, which would you choose? My sound preference is slightly above medium pitched to high pitch.
Here they are-
SJC Custom 6.5x14 Hyrbid. 25 ply maple (wrapped gold sparkle) and acrylic (clear) would be about a half inch thick. Diecast hoops, brass hardware. 4 1 inch drilled vents. (would be acrylic/maple/acrylic)
Here's a basic idea of the looks-
http://sjcdrums.com/uploads/gallery/large/cassamassima_snare.jpg
The other snare is about 7 ply maple 6.5x14. Diecast hoops. So it's the Lugwig Classic Maple Snare-
http://memphisdrumshop.com/index.php?main_page=product_info&cPath=2_31&products_id=9804
And last would be another SJC snare, 6.5x14 8 ply maple, brass hardware, diecast hoops. Then a hand burned design into the the natural finish.
http://sjcdrums.com/uploads/gallery/large/bravelittletoastersnare2.jpg (it has a cord that's burned all the way around the drum too that leads to the main design which is seen there.)
Thanks!
Mark