I just bought my new ekits the other day. I have already run into a problem which I'm hoping can be fixed with some advice. After I slide the hammer onto the axle I find out there isn't enough room on the axle to put my spring rocker back on properly. I can tighten the spring rocker but it's not in contact with the axle so the rocker doesn't stay on. If I try to use the pedal the spring rocker will just pop off and I'll have to get it back on again. I'm confused as to why there isn't enough room for both the hammer and spring rocker, but I hope I'm doing something wrong rather than the pedal being screwed up.
Thanks for any help!