DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Electronic Drums

Electronic Drums All about Electronic Drums

Reply
 
Thread Tools
  #1  
Old 10-21-2013, 12:49 PM
Fuori Fuoco Fuori Fuoco is offline
Junior Member
 
Join Date: Oct 2013
Posts: 1
Default SPD SX High Pads Issue

Hi Everybody,

in my SPD SX I realized that the "high" pads (that ones that cover the high angled edge ) are really less sensible that the other six "plain" pads.

If I strike with my stick one of the plain pads with a low dinamyc stroke it sound perfectly in a low volume, but if the same dynamic I strike one of the three top pads it doesn't sound!!!

It have to be stroke harder to make some noise.

Is it normal?

Should I sent my machine back to the Roland assistance?

Thanks for any suggestion
Reply With Quote
  #2  
Old 10-21-2013, 05:06 PM
bermuda's Avatar
bermuda bermuda is online now
Drummerworld Pro Drummer - Administrator
 
Join Date: Apr 2006
Location: Los Angeles
Posts: 5,406
Default Re: SPD SX High Pads Issue

I've noticed the same with mine, and I'll guess part of the reason may be that those are thicker pads, and need more velocity to trigger the sound.

I'd suggest either using those pads in a different way - not trying to play dynamically on them - or change their sensitivity so they respond more like the flat pads (or chage the flat pads' sensitivity to match the top 3 pads.)

Good luck,

Bermuda
Reply With Quote
  #3  
Old 10-21-2013, 11:51 PM
wildbill wildbill is offline
Platinum Member
 
Join Date: Sep 2011
Location: Midwest - USA
Posts: 3,028
Default Re: SPD SX High Pads Issue

The Yamaha Multi-12 is the same way. The upper and lower three smaller pads are less sensitive than the inner 6 larger ones. There is one less sensitivity setting for them also.
Yamaha says this is normal.

I know it's not info directly related to the SX, but they're probably somewhat similar in the workings of the pads.
Reply With Quote
  #4  
Old 10-22-2013, 07:52 AM
Shedboyxx's Avatar
Shedboyxx Shedboyxx is offline
Silver Member
 
Join Date: Dec 2007
Location: Woodland Hills, CA
Posts: 671
Default Re: SPD SX High Pads Issue

It's older brother the SPD-S is the same. Seems to be the case for these 'edge trigger' type pads. I reserve mine for one hit/one dynamic types of sounds (gong, concert bass drum, FX) and more sensitive stuff for the 6 other pads.

You can also use these high pads for utility stuff like advancing patches or starting a loop.
__________________
"Time...to Unpimp......Ze Auto ....huuuuuh"

Jim Martin Music
Reply With Quote
  #5  
Old 10-26-2013, 05:35 PM
Geoff_fry01's Avatar
Geoff_fry01 Geoff_fry01 is offline
Member
 
Join Date: Jan 2006
Location: Birmingham, UK
Posts: 63
Default Re: SPD SX High Pads Issue

hi, changing the sensitivity will help, but I have also found changing the angel of the spsx (so changing the angle the stick hits) will effect it considerably.
if its still an issue I would suggest adding a BT1 or other "external" pads.. and using them instead of the top 3 pads. .. you can pick up cheap rubber pads all over ebay.

cheers
Geoff
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 10:46 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com