DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Other Gear

Other Gear Discuss Hardware and all other equipment not covered in the other topics

Reply
 
Thread Tools
  #1  
Old 11-22-2012, 07:52 PM
mabhz mabhz is offline
Senior Member
 
Join Date: Mar 2008
Location: Brasil
Posts: 205
Default DW puppy bone/cymbal stacker on TAMA stand - it fits??

Hi all!

I have kind of an urgent need for information, cause theres a dealine to place my order on an online shop...

I need to know if the:

DW puppy bones model SM2031 (http://www.dwdrums.com/factoryaccess...TNAME=dwsm2031)

and

DW cymbal tilter clamp model SM2034 (http://www.dwdrums.com/factoryaccess...TNAME=dwsm2034)

FIT on a TAMA HC73BWM Roadpro Boom Stand

http://www.musiciansfriend.com/drums...pro-boom-stand

The DW hardware/puppy bones will only fit 1/2" (12.7mm), but Im not sure if they fit a TAMA Roadpro stand.

Can someone please give me a 100% sure answer about this?

Anyone uses these cymbal adapters on a TAMA Roadpro stand?

THANKS!!!!
Reply With Quote
  #2  
Old 11-22-2012, 09:16 PM
alparrott's Avatar
alparrott alparrott is offline
Platinum Member
 
Join Date: Jul 2009
Location: Wenatchee, WA
Posts: 4,125
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

12.7mm is an industry standard boom size, so it *should* work. But I have no firsthand experience with Tama stands.

If you want to make sure it works, you could stay with the same brand. Tama makes a similar boom attachment holder:
http://www.interstatemusic.com/34993...Fal_QgodLzsAtA
__________________
Al Parrott
"Jus suum cuique"
-------------------------------------------------------
Reply With Quote
  #3  
Old 11-23-2012, 12:30 PM
mabhz mabhz is offline
Senior Member
 
Join Date: Mar 2008
Location: Brasil
Posts: 205
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

Thanks a LOT for the comments and suggestion! Im already checking prices for that Tama hardware.

I have just measured my Tama Roadpro boom arm with a precision tool, and its exactly 12.0mm thick.

Both Gibraltar and DW cymbal tilters are 12.7mm.

Do you folks believe its a GOOD fit or I might have problems?

Maybe I could wrap a littel piece of paper to make the boom thicker??
Reply With Quote
  #4  
Old 11-23-2012, 03:41 PM
alparrott's Avatar
alparrott alparrott is offline
Platinum Member
 
Join Date: Jul 2009
Location: Wenatchee, WA
Posts: 4,125
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

Quote:
Originally Posted by mabhz View Post
Thanks a LOT for the comments and suggestion! Im already checking prices for that Tama hardware.

I have just measured my Tama Roadpro boom arm with a precision tool, and its exactly 12.0mm thick.

Both Gibraltar and DW cymbal tilters are 12.7mm.

Do you folks believe its a GOOD fit or I might have problems?

Maybe I could wrap a littel piece of paper to make the boom thicker??
I wouldn't. After all, it's your pies on there... I personally wouldn't want $200 of bronze flopping around unexpectedly.
__________________
Al Parrott
"Jus suum cuique"
-------------------------------------------------------
Reply With Quote
  #5  
Old 06-27-2013, 06:39 AM
porter's Avatar
porter porter is online now
Platinum Member
 
Join Date: May 2012
Location: Texas
Posts: 2,495
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

I would not worry about it in any capacity. The clamps are designed to have "wiggle room". If you are really worried, you could get the Tama one, but really there should be no problem.
__________________
Check out my Youtube channel!
Reply With Quote
  #6  
Old 02-11-2014, 12:40 AM
xzach23x xzach23x is offline
Junior Member
 
Join Date: Jan 2014
Posts: 3
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

Does anyone know if I can use my dw collectors series toms on my tama RoadPro multi clamps?
Reply With Quote
  #7  
Old 02-11-2014, 03:58 AM
drummaman1's Avatar
drummaman1 drummaman1 is offline
Senior Member
 
Join Date: Sep 2005
Posts: 177
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

Quote:
Originally Posted by xzach23x View Post
Does anyone know if I can use my dw collectors series toms on my tama RoadPro multi clamps?
I know that answer, and that is no. DW tom mounts are 1/2" (12.5mm?) Tama's tom mounts are 10.5mm.

What I have done, because I use DW harware with my Tama drums, is to replace one of the tom arms on a DW 9900 double tom stand. It's how I set my toms up.
Reply With Quote
  #8  
Old 02-12-2014, 03:02 AM
porter's Avatar
porter porter is online now
Platinum Member
 
Join Date: May 2012
Location: Texas
Posts: 2,495
Default Re: DW puppy bone/cymbal stacker on TAMA stand - it fits??

Quote:
Originally Posted by drummaman1 View Post
I know that answer, and that is no. DW tom mounts are 1/2" (12.5mm?) Tama's tom mounts are 10.5mm.

What I have done, because I use DW harware with my Tama drums, is to replace one of the tom arms on a DW 9900 double tom stand. It's how I set my toms up.
Yeah, those sizes won't work. L-rods attached to balls are available online easily in 9.5, 10.5, and 12.5mm, and it's also easy enough to switch out those parts on clamps.
__________________
Check out my Youtube channel!
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 04:40 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com