DRUMMERWORLD OFFICIAL DISCUSSION FORUM   

Go Back   DRUMMERWORLD OFFICIAL DISCUSSION FORUM > Drum Gear > Heads and Sticks

Heads and Sticks Discuss Heads and Sticks

Reply
 
Thread Tools
  #1  
Old 04-05-2013, 12:05 AM
fickpack's Avatar
fickpack fickpack is offline
Member
 
Join Date: Jun 2012
Location: the matrix
Posts: 35
Default Rods from shish kebab sticks?

So I've been eyeing some pro-mark hot rods lately as my band sometimes plays songs that would necessitate lower volumes, and I was thinking of any possible way to save money when I remembered the little wooden sticks that you stick stuff on for kebabs. They're about the same diameter as the little rod thingies, and taping a few together would probably make a nice de facto hot rod. Before I go to the grocery store, does this seem like insanity to anybody?
__________________
Think about it.
http://soundcloud.com/fickpack
Reply With Quote
  #2  
Old 04-05-2013, 09:34 PM
Green_C's Avatar
Green_C Green_C is offline
Member
 
Join Date: Jan 2012
Location: Grand Funk Country, USA
Posts: 80
Default Re: Rods from shish kebab sticks?

I can't comment on how well it might work, but I like your train of thought. The only thing I might add is rather than taping them together use heat shrink tubing. If the real hot rods aren't assembled using heat shrink tubing they use something very similar. You can get heat shrink tubing from any electronics supply house such as Mouser or Newark. Check out P.N. 97M6869 on www.newark.com. If you don't have a heat gun to shrink the tubing you can carefully heat the tubing over your stove.
Reply With Quote
  #3  
Old 04-05-2013, 09:47 PM
Anduin's Avatar
Anduin Anduin is offline
Pioneer Member
 
Join Date: Jul 2005
Location: Canada
Posts: 1,186
Default Re: Rods from shish kebab sticks?

Definitely NOT insanity. In fact, a late-night kebab party with many brewskis probably led to the idea in the first place.

If you use tape, try to wrap the dowels where they wonít be hitting rim shots, or youíll end up with tape goo all over your rim. Also, maybe sand a bit of a round edge onto the tips.

And let us know how it works, ícause Iím not too thrilled with the price of the prefab dowel thingies either.
Reply With Quote
  #4  
Old 04-05-2013, 09:48 PM
Anduin's Avatar
Anduin Anduin is offline
Pioneer Member
 
Join Date: Jul 2005
Location: Canada
Posts: 1,186
Default Re: Rods from shish kebab sticks?

Quote:
Originally Posted by Green_C View Post
If you don't have a heat gun to shrink the tubing you can carefully heat the tubing over your stove.
Or try a hair dryer. Or a lighter.
Reply With Quote
  #5  
Old 04-05-2013, 11:39 PM
FlamFlamMan's Avatar
FlamFlamMan FlamFlamMan is offline
Senior Member
 
Join Date: Mar 2012
Location: Camden, NJ
Posts: 248
Default Re: Rods from shish kebab sticks?

I've been making my own bundle sticks (hot rods, thunder rods, etc) for years. Just find a store that sells real dowels. They some in different sizes so you can make perfect sized rods, and they are generally pretty cheap. I normally go to the local hobby shop or small town hardware store.

I assemble them with two wraps of duct tape around the upper portion. Then smear some wood glue between the sticks on the grip end. Then both these areas get some heat shrink tubing I order from the local industrial supply (comes in all sorts of colors). To top it off I've been reusing the rubber ends from the pro-mark thunder rods for years. Last time I added it up a pair of thunder rods cost me something like $5.00 to make.
Reply With Quote
  #6  
Old 04-05-2013, 11:50 PM
tamadrm tamadrm is offline
Platinum Member
 
Join Date: Nov 2010
Posts: 5,486
Default Re: Rods from shish kebab sticks?

The only problem with some of those kabob sticks is that a lot of them are made from bamboo which can splinter into very sharp shards.Experiment wearing gloves first.

I would thing hickory,maple or oak dowel rods would work better.

Steve B
Reply With Quote
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off




All times are GMT +2. The time now is 07:46 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com