View Single Post
  #100  
Old 04-16-2010, 08:36 PM
maidenfan215's Avatar
maidenfan215 maidenfan215 is offline
Junior Member
 
Join Date: Dec 2009
Location: Conover, NC, USA
Posts: 9
Default Re: THE DRUM MODIFICATION THREAD.

Quote:
Originally Posted by BGH View Post
I've been involved for the last couple of months in piecing together my dream kit with used Yamaha Recording Custom drums. Reasons are 1) cost of new vs used and 2) I prefer the older drums of the RC line. I decided I would buy the exact sizes I wanted, regardless of color, and refinish as needed. I'd be going for a black look, thinking that I could re-lacquer odd colors to black. I did research before I started buying drums, and I thought I could pull it off.

It worked. I lucked in to finding most of the drums in black, and had to refinish 3 drums out of 9 that I bought: 8, 10 and 12" toms. The 12 was gray, the 10 red and the 8 white. I won't elaborate on the process, unless someone is really interested. If so, just post a reply and I'll give more details. For now, I'll just say that I carefully used a hi-gloss black lacquer paint in spray cans. Don't try this unless you have a very well ventilated area, like a garage, etc. The fumes of this paint are potent. And the air temperature needs to be reasonably warm for the paint to set-up properly.

You can see the results. Not bad for a first timer. I don't have a photo of the 12" tom before I started, so you see just the 10" and 8" before and after, and the 12" after in both shots.
first off, very nice kit dude, and i have a question. is the shell of your snare copper???
__________________
http://i7.photobucket.com/albums/y294/MEGACHIVA/powerslave.jpg
Reply With Quote