View Single Post
  #131  
Old 04-13-2009, 06:46 PM
sel498's Avatar
sel498 sel498 is offline
Junior Member
 
Join Date: Jan 2009
Location: Oklahoma
Posts: 23
Default Re: HARDWARE DIY/MODS/REPAIRS THREAD

Quote:
Originally Posted by Deathmetalconga View Post
TRS, also known as stereo quarter-inch, is XLR. Don't confuse TRS with a standard mono instrument plug. TRS was developed to carry XLR signals into mixing boards and other places where XLR plugs and sockets take up too much room. Look at wiring diagrams and you'll see TRS is the same as XLR in terms of signal and wiring and shielding; the only thing different is the plugs. You could do away with XLR plugs and just use TRS, but most mics still use XLR. The Tip, Ring and Sleeve of TRS each carry one of the three XLR pin signals.

You could do this mod if you had a soldering iron and you will have to order a 90-degree TRS plug to fit under the drum, but it is a pretty easy mod and it's cool just to be able to "plug in" your bass drum!
Awesome, i think i will do this, I would just need to get a new TRS connector to install on drum and a TRS 90 degree 3' long to xlr to plug into snake, thanks so much!!
Reply With Quote