Thread: Axis question
View Single Post
  #15  
Old 01-21-2014, 11:43 PM
beyondbetrayal beyondbetrayal is offline
Senior Member
 
Join Date: Jan 2013
Location: canada
Posts: 373
Default Re: Axis question

Quote:
Originally Posted by Bretton View Post


you can adjust the angle between the beater and the footboard by loosening these two set screws, then adjust the resting angle of them both by loosening the set screw on the spring assembly.
NO NO NO NO NO NO NO

this post and all following pictures should be deleted.. I can already see some poor kids with their shiny new axis pedals going home and wrecking them because of this bad advice.

the new ones have a sticker on them that say DO NOT TOUCH .. kinda like the manual says DO NOT TOUCH.

please don't give out advice if you have never owned the pedal before. for this exact reason.


you can get heel risors (i made my own) to flatten it out.. or you can get toe risors if you want. but when they are set up pretty much perfect from the factory there is not alot of adjustment needed
Reply With Quote