View Single Post
  #7  
Old 10-04-2013, 06:27 PM
Arky's Avatar
Arky Arky is offline
Platinum Member
 
Join Date: Aug 2011
Location: Germany
Posts: 3,048
Default Re: Iron cobra chrome questions.

Loosen the screws on the right/main pedal handside and take a look at the threads. Both ends of the outer drive shaft should look the same. There should be threads in the outer shaft but there aren't any in the connection bar (of course - to allow for flexible positioning) - those are just jammed by tightening the screws. Now if for some reason there's no threads on the left handside I'd cut some threads into them and use the next bigger screw size, that would work but may look unusual.
Reply With Quote