View Single Post
  #17  
Old 07-24-2013, 01:25 AM
audiotech
Guest
 
Posts: n/a
Default Re: My CUSTOM Internal Bassdrum Mic Holder System [Promo Video]

Quote:
Originally Posted by David Floegel View Post
Hi Dennis,

thank you for that question.

Ok. Where did you hear that I want to rotate one mic 180 degrees? If you'd do that, you of course would have phase issues. You would need to flip the phase of course.
And there's no relation between phase issues and different mic types actually?
Then why would you have two microphones pointed in the exact same position using a double microphone clip? If it's just for redundancy purposes, then maybe you have a shallow point of reasoning.

And actually you're very wrong about the phase relationship between a condenser and a dynamic microphone, they're approximately 90 degrees out of phase. How many times have you selected three, four or five different microphones consisting of both dynamic and condenser units positioned in front of a vocalist to ensure selecting the best unit for their voice, maybe never? If you have, next time try summing a dynamic and a condenser microphone, then try to tell me there is no phase variations between the two. If you have the ability to hear correctly or see a signal on a digital cluster or analog meter correctly this should be very evident to you. Here's a more simplistic task, just set up a condenser microphone and a dynamic microphone in front of yourself. Get a correct level on each microphone by itself and then sum the two. The level will drop off and you'll loose much of the high frequency content compared to hearing each one seperately. If at this point you can't hear the problems with the phase, it's time for you to hang up your brackets and never again touch another microphone.

Dennis
Reply With Quote