View Single Post
  #1  
Old 03-30-2013, 04:59 PM
bobdadruma's Avatar
bobdadruma bobdadruma is offline
Platinum Member
 
Join Date: Jul 2008
Location: second measure of a fill-in
Posts: 10,153
Default 7/8 Inch Cymbal Arm Into 15/16 Inch Tom Mount. How To

I installed a Gibraltar rail mount to hold the high tom on my Saturn Manhattan Jazz kit and I wanted to use the factory bass drum mounted 15/16 inch tom mount for a cymbal arm holder.

~No one makes a cymbal arm with a 15/16 inch down tube.~

~Solution~

I bought a Gibraltar cymbal arm with a 7/8 inch down tube.
I used a tube cutter to cut off 7 inches of 15/16 inch tube from the Mapex tom holder.
(first pic shows Mapex tom holder with 7 inches of pipe removed)

I slid the 15/16 inch tube over the 7/8 inch cymbal arm down tube.
I drilled a small hole and I inserted a small self tapping screw to secure the two down tubes together. (second pic shows assembled cymbal holder with added 15/16 inch tube)

I got just what I wanted!
Attached Images
   
__________________
I kind of like old drums:)
Reply With Quote