DRUMMERWORLD OFFICIAL DISCUSSION FORUM

DRUMMERWORLD OFFICIAL DISCUSSION FORUM (http://www.drummerworld.com/forums/index.php)
-   Heads and Sticks (http://www.drummerworld.com/forums/forumdisplay.php?f=16)
-   -   BD: Clear or coated with or without front logo? (http://www.drummerworld.com/forums/showthread.php?t=115725)

DangerousDave 04-02-2014 04:26 PM

BD: Clear or coated with or without front logo?
 
Hey guys!
Just interested in opinions about resonant BD heads. Which do you prefer? Do you have drum manufacturer logo or just plain head or something else?

Myself, I went from EMAD resonant to G1 clears. I prefer everything following the same pattern so I removed original Evans logo which was on top of heads and put black Evans stickers on the bottom. On top I put black Tama logos so all heads are kinda unified considering the looks and logo colors.

BTW I believe I do suffer from opsessive compulsive disorder :D

TColumbia37 04-02-2014 04:39 PM

Re: BD: Clear or coated with or without front logo?
 
Quote:

Originally Posted by DangerousDave (Post 1246873)
BTW I believe I do suffer from opsessive compulsive disorder :D

Apparently not too severly ;)

But on one kit, I have the stock Yamaha logo PS3 with a KickPort, and on my other kit, I have a smooth white PS3 with a KickPort. I originally went in looking for an EQ3, but they were out of stock, so I picked up the PS3 and removed the logo. And I actually really love the look of the smooth white PS3. You can see the outer ring through the initial ply and it gives a really cool look.

loki03xlh 04-02-2014 04:53 PM

Re: BD: Clear or coated with or without front logo?
 
I have the stock black Starclassic reso head with a 5" port @ 4:00. When I get around to replacing it, I'll probably get a white head and let an artist friend go crazy on it, then stick a Tama sticker on it somewhere.

DangerousDave 04-02-2014 05:42 PM

Re: BD: Clear or coated with or without front logo?
 
Quote:

Originally Posted by TColumbia37 (Post 1246879)
Apparently not too severly ;)

But on one kit, I have the stock Yamaha logo PS3 with a KickPort, and on my other kit, I have a smooth white PS3 with a KickPort. I originally went in looking for an EQ3, but they were out of stock, so I picked up the PS3 and removed the logo. And I actually really love the look of the smooth white PS3. You can see the outer ring through the initial ply and it gives a really cool look.

Don't get me even started on the stands, angles and even pedals! :D

I originally wanted a clear resonant with inner ring, but it was more expensive so I went with G1s. To my dismay, even Evans raised prices recently.
I remember seeing Nick Menza's Pearl Masters with that kind of heads and at the time it looked nothing special, but as time gone by...


All times are GMT +2. The time now is 05:01 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com