DRUMMERWORLD OFFICIAL DISCUSSION FORUM

DRUMMERWORLD OFFICIAL DISCUSSION FORUM (http://www.drummerworld.com/forums/index.php)
-   Other Gear (http://www.drummerworld.com/forums/forumdisplay.php?f=17)
-   -   Ludwig L348TH (http://www.drummerworld.com/forums/showthread.php?t=111543)

qualendi 11-05-2013 01:46 PM

Ludwig L348TH
 
1 Attachment(s)
Hi, I'm a short person and I play really low. I'm looking forward towards the Ludwig L348TH. It looks cool with the fabric top and all. It's just that I don't know how low it can go. Can anyone tell me how far down it could go? I hope it could go down upto 16" in height. ;)

Arky 11-05-2013 01:54 PM

Re: Ludwig L348TH
 
I don't have the info you're looking for but don't forget that you can always cut any thread into any desired size so shortening any excess thread takes just a few minutes. In fact, this might even help you because you wouldn't have to bother about the exact height - put the (or: any) throne into the lowest position, mark the distance to your desired throne height and cut the excess length - done.

Les Ismore 11-05-2013 08:02 PM

Re: Ludwig L348TH
 
1 Attachment(s)
Quote:

Originally Posted by Arky (Post 1195616)
I don't have the info you're looking for but don't forget that you can always cut any thread into any desired size so shortening any excess thread takes just a few minutes. In fact, this might even help you because you wouldn't have to bother about the exact height - put the (or: any) throne into the lowest position, mark the distance to your desired throne height and cut the excess length - done.

Pretty sure the reference is to the base height, spindles go down to zero (the top of the base).

The shorty thrones on the market have a base height of 16" once the spindle is down all the way there's no reason to cut.

Depending on the design, collapsing the legs of the base together a little can lower the post, or it can raise it and this is a good little trick if you're experimenting with slight height adjustments, fold the legs to raise/lower and you don't lose your original height setting.

qualendi 11-06-2013 05:57 AM

Re: Ludwig L348TH
 
Do Ludwigs have thrones that have a base height of 16" like Les Ismore said? If not I might have to get thrones that are designed to be played for 7-year old kids and hobbit sized people...or maybe build a custom one in my garage.

KarlCrafton 11-08-2013 05:27 PM

Re: Ludwig L348TH
 
Just put this on another thread.
quick link:
http://www.cymbalfusion.com/Gibralta...rone-Base.html

I own an older version of this, and it goes to 16" to top of seat.

They probably offer one with a top on it too.

Les Ismore 11-08-2013 09:24 PM

Re: Ludwig L348TH
 
Quote:

Originally Posted by KarlCrafton (Post 1196534)
Just put this on another thread.
quick link:
http://www.cymbalfusion.com/Gibralta...rone-Base.html

I own an older version of this, and it goes to 16" to top of seat.

They probably offer one with a top on it too.



I checked the GIBRALTARS and the ROC's out, their short base bottoms are 16" to the spindle at zero, add your seat top and your in the 20's as the spec's note:


FEATURES

Short Throne Base
Adjusts from 16" to 24" in height
Seat fits onto a 7/8" diameter shaft
Adjusts from 20" to 28" in height
B9608S Short throne base


16" isn't really low IMO. I have STADIUM throne bases that go down to 12.5" without the tops, tho they're 1" tubes, not spindles.

ROC and GIBRALTAR need to get a short base together, there's a strong kids market and quite a few adults would prefer and could make a smaller, shorter, lighter base work.

Im willing to bet 95% of the drummers out there do not have their spindles/seat posts above 24"

qualendi 11-12-2013 04:39 AM

Re: Ludwig L348TH
 
1 Attachment(s)
finally I got info from www.musicalgrellmann.com.br/, but it's in mexican or something.

I think it says, "minimum height 44cm".
And if my math is correct, that's 17 3/8".
Well...it's only 1 3/8" over my expected height... not bad

Red Menace 11-12-2013 04:49 AM

Re: Ludwig L348TH
 
Quote:

Originally Posted by qualendi (Post 1197390)
finally I got info from www.musicalgrellmann.com.br/, but it's in mexican or something.

That's Portuguese there Professor. I wasn't aware we had out own language called "Mexican".

KarlCrafton 11-12-2013 04:37 PM

Re: Ludwig L348TH
 
I must have a seat that was discontinued then.
I got it on eBay (about 2 years ago), and it was a model at least 5 years old from the sticker/logo style.

I'll measure again, but I'm pretty sure it was 16" to the top of the R&S seat top I have on it.
I got it for my son who was 8 at the time.

KarlCrafton 11-13-2013 01:41 AM

Re: Ludwig L348TH
 
Just measured the Gibraltar I have.
To the top of the seat, set all the way down (where you'd sit) is 16".
A Roc N Soc is what I have on it.

The top of the height adjustment of the spindle (big, knurled, silver thing with the giant wing bolt) is 10.5"

This must be a pretty old model seat I have.
I don't know the model #, but there might be some out there on eBay.

qualendi 11-14-2013 06:50 AM

Re: Ludwig L348TH
 
Por Favorê, Red Menace. Thanks for pointing out that it was Portuguse.

qualendi 11-27-2013 03:29 AM

Re: Ludwig L348TH
 
2 Attachment(s)
Por Favoré, I have recently returned form Malaysia. And in a drum store somewhere in Damansara, I accidentally found the L348TH. I didn't expect it to be there, even the shop keeper didn't know that they had it on display. I literally ran towards it, lowered the cushion to as low as it can go and asked the shop keeper for a measuring tape. Surprisingly, it can go to a minimum height of 16.5", which is much lower than the information that I got from the Portugese website. The cushion felt very comfortable compared to the leather ones in the store. Costs RM230, which is about U$72. Compared to if I purchase it online, which I can get for U$65, plus $50 for FedEx shipping. So I saved, U$43!!!

As soon as I got home, I found out that if I remove the locking mechanism, I can further reduce the height to 16.2"! And once I sat my ass down on it, my body weight pressed it to 16"! It's so unbelievable that an atheist drummer would suddenly believe in God! Hopefully not Zeus . . .

Best $ well spent. Now I can practice my Bucket-of-fish and Chicken-Tika proudly.


All times are GMT +2. The time now is 01:52 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com