DRUMMERWORLD OFFICIAL DISCUSSION FORUM

DRUMMERWORLD OFFICIAL DISCUSSION FORUM (http://www.drummerworld.com/forums/index.php)
-   Heads and Sticks (http://www.drummerworld.com/forums/forumdisplay.php?f=16)
-   -   EMAD2: foam ring keeps falling off (http://www.drummerworld.com/forums/showthread.php?t=111266)

Ameer27 10-24-2013 07:20 PM

EMAD2: foam ring keeps falling off
 
Hi all. First off, I'm sorry if this has been discussed before, but I searched and didn't find exactly what I wanted.

So I just got an EMAD2 kick batter head today. After about 10 minutes of playing it, the foam ring came off. I reapplied it and it fell off again...

Is there any solution for this?

Beam Me Up Scotty 10-25-2013 07:11 AM

Re: EMAD2: foam ring keeps falling off
 
It came off? uh, wow. And here I am, having trouble taking my foam ring out, since it has such a tight fit. I'd say throw some tape on it, if possible?

Yoshinya 10-25-2013 03:36 PM

Re: EMAD2: foam ring keeps falling off
 
I often have that problem as well with the thinner foam ring on the EMAD2 and the GMAD, especially playing gigs.
I switched to the thicker ring out of necessity, though I prefer the sound of the thinner one.
I wonder if this is simply something due to the width of the foam ring making it more susceptible to falling out?

brady 10-25-2013 09:31 PM

Re: EMAD2: foam ring keeps falling off
 
Maybe rub your finger along the ring to press it into the head more. When you put the foam in it, it should hold it in place better if you're careful not to pry up the ring too much when installing the foam.

If that fails, maybe you could tape a small coin-size piece of velcro tape at the top of the head, right round the ring. Put the other part on the foam ring. That should hold it in place.

EvansSpecialist 10-28-2013 03:00 PM

Re: EMAD2: foam ring keeps falling off
 
Was the ring fully tucked into the sleeve? I've seen issues with the rings not being fully tucked in down by where the pedal clamps onto the hoop.

If it was, drop me an email: evans@daddario.com

Three 11-29-2013 02:40 PM

Re: EMAD2: foam ring keeps falling off
 
I have this problem, too. Even after making sure the foam ring is perfectly tucked into the plastic sleeve. I think it's just the vibrations gradually loosening it up.

My solution = tape.

A small strip of tape on the plastic sleeve then tucked under the foam ring. I did it in four places: top, bottom and on the left and right to create a plus sign shape.

As long as you're not forever changing which ring you use, I found this solves the problem :)

longgun 11-30-2013 03:45 AM

Re: EMAD2: foam ring keeps falling off
 
I've used an EMAD2 for a while and never had that happen, but I use the thicker ring...................like others said, I think a couple of small pieces of tape should work

bromasi 11-30-2013 04:29 AM

Re: EMAD2: foam ring keeps falling off
 
double stick tape.
xxxxxxxxxxxxxxxxxxxxxxxxxxx

SgtThump 12-01-2013 02:00 AM

Re: EMAD2: foam ring keeps falling off
 
Also, be careful running your finger around the plastic sleeve. It sliced my finger open once.


All times are GMT +2. The time now is 08:52 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Bernhard Castiglioni's DRUMMERWORLD.com