I need a 1" boom cymbal mount so I can insert it into the tom mount on my kick drum. The tom mount is 1" diameter. Any guidance or help will be appreciated.
I ran into this problem years ago when mounting a cymbal in my Tama bass drum tom mount. What I ultimately learned is that drum companies use pretty standard sizes across their drums and hardware so I was able to take the legs off the bottom of a Tama cymbal stand and use that as the bottom/largest section of tubing was the exact diameter as the hole. If you've got a spare stand or two around, spend a few minutes fiddling with different combinations of pipe sections and see if you have one that fits in there.I need a 1" boom cymbal mount so I can insert it into the tom mount on my kick drum. The tom mount is 1" diameter. Any guidance or help will be appreciated.
I was looking for pipe section = 1", not the bottom part with tripod. Sorry.
Also, here: https://www.gibraltarhardware.com/product/6709nl/
The middle section is 1" as stated in the description on the page. If you are dead set on buying a new part then this should do you fine. You also can just go around to pawn shops with a measuring tape... Bet you'll find a stand with a 1" middle tube for much less.
Awesome, happy that worked out for you! It looks to be a sturdy piece of hardware. I too am a fan of the cymbal in the bass mount, so versatile. I also usually don't use rack toms so having the option to center mount my ride is great.I found a Gibraltar No Leg (NL) boom stand that has 3 different tube diameters. One is supposed to be 1". I'll get it this week. Just what Ron Cadillac suggested.