Alesis D4 Audio Trouble

baseball3

Junior Member
I know this is a noob question but how do you hook the Alesis d4 drum module up to a amp?. Thanks in advance.
 

stabmasterarson

Senior Member
you run a 1/4" patch cord from the main outs in the back of the D4, to a 1/4" input on the pa or amp or whatever. You can run 2 of them if you want the D4 to output stereo if want too.
 

DrumEatDrum

Platinum Member
you run a 1/4" patch cord from the main outs in the back of the D4, to a 1/4" input on the pa or amp or whatever. You can run 2 of them if you want the D4 to output stereo if want too.
Yup.

Rule of thumb is always the OUT goes to the IN of the next device. :)
 

baseball3

Junior Member
I did that. There is a left main output and a right which one do i put it in?

Edit: I tryed puting in each on none of them worked...I held down drum set button then hit preview and it said alesis demo song playing but no sound came out.And i have volume up.
 
Last edited:
Top