Remove Logo - Remo Smooth White PS3

[zambizzi]

I use one as a bass drum reso and I'd like to remove the Remo logo, if I can. Anyone have a good, simple solution for this that won't ruin or discolor the head? I've got a nice logo I'd like to put in its place and it's *right* in the way. Can't flip it over either, the head is ported just where I like it.

Thanks!

[DrumART Jim]

I use one as a bass drum reso and I'd like to remove the Remo logo, if I can. Anyone have a good, simple solution for this that won't ruin or discolor the head? I've got a nice logo I'd like to put in its place and it's *right* in the way. Can't flip it over either, the head is ported just where I like it.

Thanks!

Two words: lacquer thinner. :) Nail polish remover might also work, but we use lacquer thinner to take the logos off all our heads with no ill effects. Just use a *light* touch to avoid smearing and let the chemical do the work. Clean up with a wet paper towel when you're done and voila! White out.

[PureRockFury]

Acetone which is nail polish remover works just fine. If using it, act quick it evaporates quickly. I would also go over the area with a bit of water after.

[Mendozart]

Be careful with nail polish remover or lacquer thinner, they can damage the head. I always use "goo gone" first, and if that doesn't work, then "goof off". The goof off is just a little stronger in strength than the goo gone.
http://www.walgreens.com/store/product.jsp?id=prod3791613&CATID=100757&skuid=sku3790462
http://www.goof-off.com/

[zambizzi]

Thanks guys, I'll take a look at your ideas. Appreciate it!

[GRUNTERSDAD]

Lighter fluid works also. Use it outdoors with ventilation.