Drum Building

[tomk]

Hey guys. Well I've been looking into building my own kit for a while now. 12x8, 14x14, and either a 18x14, 18x16, or 20x14 kick. My greatest influences use these sizes somewhat (Stanton Moore, Billy Martin, Brian Blade) I was wondering about where to get the shells/hardware and I was wondering if there were any canadian distributors of keller shells or any canadian sites in which I can get this stuff.

[bojangleman]

head over to Ghostnote.com . you can learn anything you want about that subject over there. and look at www.drumfoundry.com for the shells and hardware. but i would defenitly look and ask over there before even thinking of building a set..

Alex

[tomk]

head over to Ghostnote.com . you can learn anything you want about that subject over there. and look at www.drumfoundry.com for the shells and hardware. but i would defenitly look and ask over there before even thinking of building a set..

Alex


Haha already been done. I actually joined that forum right before I posted this. Man there are some real characters over there. I caught myself laughing out loud a few times at some posts, even avatars lol. Anyways, thanks for the response, appreciate it! Btw, I've heard alot about and visited the drumfoundry website and I was wondering if you've had any expierience with them?

[bojangleman]

haha...yes very much so. i laugh at new stuff everyday over there... and to answer your question, ive never had any personal experience. their website is very easy to use. and from what ive heard, nothin bad has been said and they have awesome bearing edges. alot of guys on GN does...so ask around there for it. hope this helps! and good luck on your mission..lol

Alex